
Safety and control photocells and sensors for automatic gates
Photocells, sensors and controls that complete the automation. Built to last, tested at every production stage, compatible with the most common control units.
Safety
Stopping the automation in time.

Argo photocell
For industrial gates: adjustable optics, reliable even in sun, fog or snow.

Elettra photocell
For residential systems: minimal design, quick installation, compatible with the most common control units.

PRAP sensor
Doppler radar: detects the direction of travel and the size of the object: pedestrian, car or truck.

Metal mass sensors
They detect vehicles on magnetic loops: they open the entrance or control the traffic lights.

Safety edge
Mechanical safety edge: the rubber sheath cushions the impact and the microswitches stop the automation.
Technical insights
Instructions and support in the documentation.
Comparison
Safety and control at a glance.
| Product | Type | Key data | Use |
|---|---|---|---|
| Argo | Photocell, adjustable optics | 20 m range | Industrial gates |
| Elettra | Photocell, fixed optics | 15 m range | Residential gates |
| DA035 · DA021 | Metal mass detector | 2 or 1 channels, DIN rail | Barriers, car parks, traffic lights |
| PRAP | Microwave radar | 8 m range, direction of travel | Entrances with pedestrians and vehicles |
| COMPRAP | Mechanical safety edge | 2 interlocked microswitches | Sliding and swing gates |
| ASM · ASIP | Key selector | Die-cast aluminium, 230 V 2 A | Opening with a key |
Frequently asked questions
Automatic gate accessories, in practice.
Which automatic gate accessories does Stagnoli make?
Photocells (Argo, Elettra), sensors (metal mass detectors, PRAP radar), safety edges and key selectors, as well as racks, flashing lights and traffic lights.
Magnetic loop or PRAP radar?
The loop with a metal mass detector only detects vehicles. PRAP is a microwave radar with no loop to lay in the asphalt: it tells a pedestrian from a car or a truck and recognises the direction of travel.
Are they compatible with other brands' control units?
Yes: photocells, sensors and controls work with the most common control units.
Build the complete system
Photocells, sensors, controls and signalling from the same manufacturer: one point of contact, one warranty.




















