VIACONTROL
Smart traffic-light control, made simple.
Three different operating logics, a clear 2.2" colour display and a 6-module DIN body that fits into any electrical panel.
Smart traffic-light control, zero complications.
VIACONTROL is the new Stagnoli traffic light controller for gates, crossings and private roads. A single compact 6-module DIN unit drives two traffic lights, with auxiliary outputs ready for the rest of your automation.
Where traditional controllers force you to think in terms of wiring, VIACONTROL thinks in states. Connect the traffic lights, choose a mode, set two timers. Done.
Easy installation in any electrical panel
The compact 6-module DIN enclosure clips onto a standard rail. No external board, no custom bracket.
Universal voltage: 24V – 230V
One unit, both power supplies. The same VIACONTROL accepts a 24V or 230V input: choose the wiring best suited to the panel and install it.
Intuitive, fast programming
A 2.2" colour display and a four-button menu guide you through configuration in just a few minutes: no PC, no app, no cables.
Reliable control logic
Three operating logics that are simple to set up. No conflicts, no surprises after a power cycle.
AUX outputs ready for automation
Two configurable auxiliary contacts drive gate motors, barriers, alarms or signage without an additional relay board.
Two traffic lights, one single unit
A single VIACONTROL drives a complete pair of two- or three-colour signal heads.
Display and interface
Everything that matters, on a single screen.
-
Real-time traffic light status
See both signal heads in real time, with their active phase.
-
Inputs and AUX at a glance
Every sensor, button and auxiliary output, visible instantly.
-
Four-button configuration
+ / − / ESC / ENTER. No PC, no app, no extra cable.
Operating modes
Three modes. One single controller.
Choose the right behaviour for the site: sensor-triggered, timed, or manually held.
MODE 01
Reservation
The cycle starts on demand, when a sensor or a button triggers it.
Activation
External detection
Ideal for
Residential complex exits
MODE 02
Timing
Alternates the two signal heads on a fixed time, with no sensors required.
Activation
Timed, cyclic
Ideal for
Industrial driveways
MODE 03
State
The green stays on as long as its input is held active.
Activation
Manual / held input
Ideal for
Emergencies, oversized loads
Technical specifications
Dimensions and specifications
Enclosure
6-module DIN
Power supply
24V · 230V (single unit)
Navigation
+ · – · ESC · ENTER
AUX outputs
2 × NC / COM / NO
Accessory power supply
24V · max 0.5 A
Dimensions
106 × 90.2 × 57.8 mm
Display
2.2" colour
Traffic light outputs
2 × R / G / V / COM
Inputs
3 (IN1 / IN2 / IN3)
Operating modes
Reservation · Timing · State
Case Study
One-way access control at a car park entrance.
VIACONTROL in Reservation mode. Two states, one quiet residential exit.
The main road keeps flowing.
Nobody is exiting, so there is no need to interrupt traffic. The unit stays in its default state, waiting for a request.
Main road
Green
Side road
Red
A safe, timed manoeuvre.
An inductive loop detects a vehicle and activates IN1. The cycle reverses the traffic lights for the preset Green Time, then a Clearance Time keeps the road section safe before returning to standby.
Main road
Red
Side road
Green
Specifications, drawings and the complete user manual, all in one place.
Download the data sheet with wiring tables and electrical specifications, or contact our team to configure VIACONTROL for your next installation.