# Traffic light control system VIACONTROL | Stagnoli

URL: https://www.stagnoliaccessories.com/en/light-signalling/traffic-light-control-units/smart-traffic-light-controller
Source: Stagnoli T.G. S.r.l. (Stagnoli Accessories), Lonato del Garda (BS), Italy
Updated: 2026-11-14

> VIACONTROL traffic light controller for 2 lights on DIN rail: 2.2" colour display, 24–230 V, priority, timed and status logic. Try the simulator.

![VIACONTROL traffic light control unit on DIN rail, colour display on](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/viacontrol-hero.webp)

Control system for 2 signals · new

# VIACONTROL the traffic light controller for one-way traffic

Two traffic lights, three inputs, one display: alternating one-way traffic made simple.

[Request a quote](https://www.stagnoliaccessories.com/en/contacts?tema=semafori&prodotto=VIACONTROL)

[Watch it work](https://www.stagnoliaccessories.com/en/light-signalling/traffic-light-control-units/smart-traffic-light-controller#simulatore)

**24–230 V** voltage

**2** traffic lights

**DIN 6** modules

**2.2"** colour display

**2 AUX** NO/NC

**0.01 A** consumption

Available configurations

## One control unit, three logics.

VIACONTROL is Stagnoli's traffic light control unit for ramps, gates, crossings and private roads: a single 6-module DIN-rail unit that controls two 2- or 3-light traffic lights, reads two call sensors (IN1, IN2) and one alarm input (IN3), and has two auxiliary outputs to start the automation or for other uses. It is programmed from a 2.2" colour display and works in priority, time-based or state mode.

![VIACONTROL traffic light control unit in a DIN enclosure](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/viacontrol.webp)

![Stagnoli 2-light traffic light, red and green](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/semaforo-2-luci-rosso-verde.webp)

2 two-light traffic lights

red / green

![Stagnoli 3-light traffic light, red, yellow and green](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/semaforo-3-luci-rosso-giallo-verde.webp)

2 three-light traffic lights

with amber (TAR)

IN3 alarm

Programmable alarm state

VIACONTROL is compatible with all traffic lights in the Stagnoli range.

Voltage

### From 12 to 230 V.

The same VIACONTROL unit accepts 24 to 230 V ac/dc; for 12 V ac/dc systems there is VIACONTROL12.

**24** V

Same unit from 24 to 230 V ac/dc

Key specifications

- Traffic lights: 2, with 2 or 3 lights
- Power supply: 24–230 V ac/dc&nbsp;
- Enclosure: 6-module DIN
- Display: 2.2" colour
- Logics: Priority · time · status
- Inputs: IN1, IN2, IN3 alarm
- AUX outputs: 2 × NO/NC
- Temperature: −20 / +60 °C

Functions, times, terminal blocks and wiring diagrams in the manual and the documentation.

[Find out more](https://www.stagnoliaccessories.com/en/docs/control-units/viacontrol.md)

Simulator

## Watch it work.

A narrow ramp, two traffic lights, two loops. Choose the mode, send a car from one side or press alarm: the control unit reacts just as it would on site.

VIACONTROL control unit

System · top view

Operating mode · F1

Rest state · F3

Inputs

What happens

- **Rest** Traffic lights in the rest state set with F3: the control unit waits for a call.
- **Call** A vehicle on the loop activates IN1 or IN2 and books the green for its side.
- **Green and amber** Green for TV1 or TV2, then amber for TAR: the queued cars go through.
- **Clearance** All red for TSG until the lane is clear; then the other side, if it has called, or the rest state.

At rest both traffic lights are red: the control unit waits for a call from the loops.

- TV1: 7 s
- TV2: 7 s
- TAR: 2 s
- TSG: 5 s

Times shortened for the demo: on the control unit TV1, TV2, TSG and TAR can be set from 0 to 999 s in the TIMES menu. AUX1 and AUX2 are configured here as the «green» of their traffic light (F9, F10). Logic from the VIACONTROL user manual.

![VIACONTROL mounted on a DIN rail in an electrical panel](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/ctx-viacontrol-quadro.webp)

The interactive simulator is designed for larger screens: open it on a computer or tablet to try the logics, sensors and alarm.

[Request a demo](https://www.stagnoliaccessories.com/en/contacts?tema=semafori&prodotto=VIACONTROL)

Video tutorial

## Set up in minutes. Here's how.

From choosing the operating mode to setting the timers: follow the VIACONTROL setup step by step in our YouTube video.

[Watch the video](https://www.youtube.com/watch?v=LbY-Calbk14)

[Open on YouTube](https://www.youtube.com/watch?v=LbY-Calbk14)

![VIACONTROL: setting functions and times from the four-button menu](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/viacontrol-video-tutorial-configurazione.webp)

Fields of application

## Where VIACONTROL works.

Wherever two traffic lights have to alternate on a narrow passage, with the electrical panel close at hand.

![Underground garage ramp with a traffic light at the entrance](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/app-rampa-v2.webp)

### Garage ramps

Single lane and blind bend: priority mode with «all red» rest state, one sensor per side.

Priority

![Apartment block exit onto a road](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/ctx-centrali-condominio.webp)

### Exits onto roads

Traffic light on the road green at rest, inside traffic light red on the exit: a single sensor at the inside traffic light on the exit calls the green.

Priority

![Loading bays of an industrial building](https://www.stagnoliaccessories.com/theme_stagnoli_accessories/static/src/img/app-baie-ext.webp)

### Industrial driveways

Continuous vehicle traffic: the time-based cycle alternates the two directions even without sensors.

Time

Case studies

[Alternating one-way system: control unit and traffic lights in 3D](https://www.stagnoliaccessories.com/en/use-cases/alternating-one-way-traffic.md)

Frequently asked questions

## VIACONTROL traffic light controller, in practice.

**D: What is the VIACONTROL traffic light controller for?**

It controls two traffic lights with 2 or 3 lights to manage alternating one-way traffic: garage and car park ramps, gates, private roads and building sites.

**D: Does the VIACONTROL traffic light controller work at 12, 24 or 230 V?**

The VIACONTROL control unit runs on 24 V or 230 V. The traffic lights can instead have any supply voltage (e.g. 24 V or 230 V), because it is handled separately through a dedicated terminal: the control unit acts as a switching element. If you have a 12 V power source, choose the VIACONTROL12 model.

**D: What happens if cars arrive from both sides?**

In Priority mode the control unit serves one side at a time: after the green and clearance phase it moves to the other side. With simultaneous calls it gives way to the side that activated input 1 or 2 first; if both inputs stay active, the green alternates between the two sides according to the set times.

**D: How do I size the TSG clearance time?**

TSG is the time the slowest vehicle needs to cover the whole alternating one-way section, plus a suitable safety margin. During this phase both traffic lights stay red, so that the section is completely clear before the direction of travel is reversed, i.e. before the green passes to the opposite traffic light.

**D: What does Status mode do?**

The traffic light turns green and stays green for as long as its input is active, with no timer; if both commands arrive together the control unit sets everything to red.

**D: What happens in an emergency?**

When input IN3 is activated, the control unit switches to the alarm state chosen with function F4, for example flashing reds.

**D: What are the AUX outputs for?**

Two configurable NO/NC contacts (48 V ac/dc, 0.5 A) to drive gates, barriers, alarms or signage without an extra relay board.

**D: One side gets much more traffic: can I give it priority?**

Yes, with the queue clearing function: if, during the green time (on either side), another vehicle arrives on the side that has the green, the green time in progress is reset and starts again from 0.
