NYLON MODULAR RACKS

New racks designed for gates with a load capacity ranging from 300 to 700 kg.
We have opted to make our racks using the “Single C-Molding” process in order to guarantee minimum deformation, the best levelness and the most attractive design since it is moulded in a single step.

Technical characteristics

Total height 21/48 mm
Partial height A 15/30 mm
Width B 20 mm
Length 1.000/3.000 mm
Stagnoli Accessories Lonato (BS) - cremagliera in naylon modulari

Why Nylon and not Steel

Silence

Self lubrification

Lightness

Inexpensiveness

Resistance to atmospheric agents

Hanging gates

Racks

Racks used especially by hanging gate manufacturers

Models

Stagnoli Accessories Lonato (BS) - cremagliere in nylon modulare

ACRV33

The ACRV33 is the 33 cm rack for lightweight gates, entirely made in polyamide containing fibreglass.
It is the ideal solution for small gates, with a maximum capacity of 300 kg. Simple to install and very light in weight, it is made in the classic Stagnoli grey colour.

Stagnoli Accessories Lonato (BS) - cremagliere in nylon modulare

ACFCR33VP

The ACFR33VP is a grey rack supplied in 2-metre packages with self-perforating screws.

Stagnoli Accessories Lonato (BS) - cremagliere in naylon modulari

ACRV20B

The ACRV20B rack is installed on aluminium section bars, has no external attachments like all the other Stagnoli Racks, but instead a profile that couples with the aluminium of the gate. It is supplied together with an aluminium profile for its installation. It has a maximum capacity of 300 kg and a length of half a metre. It is ideal for installations on so-called “hanging” gates, without a ground track.

Stagnoli Accessories Lonato (BS) - cremagliere in naylon modulari

ACRS20Z

The ACRS20Z rack has a galvanized steel profile and a maximum capacity of 300 kg.

Stagnoli Accessories Lonato (BS) - cremagliere in nylon modulare

ACRV20BL

The ACRV20BL rack has an aluminium profile pre-drilled with six slots (15×8 mm) and a maximum capacity of 300 kg.

Stagnoli Accessories Lonato (BS) - cremagliere in nylon modulare

AKTCSSP1

The AKTCSSP1 rack is designed to be installed on aluminium section bars, has no external attachments like all the other Stagnoli Racks, but instead a profile that couples with the aluminium of the gate. It is suitable for gates ready for coupling the nylon profile. It has a maximum capacity of 300 kg and a length of half a metre. It is ideal for installations on so-called “hanging” gates, without a ground track.

For more information

CONTACT US